KM while the "bad" one turns blue

I think that's due to HDMI shenanigans?

  • KM replied to this.

    JTL Might be normal behavior. At the same time a message is displayed, saying there's no signal. I just mentioned it because it may be a way to detect the better monitor version.

    • JTL replied to this.

      Alright, I rounded up an EW2740L. i'll report back when it arrives. maybe there's a specific kind of replaceable backlight? possibly a whole new panel inside

        reaganry worth noting i have survived several hours now with my old samsung 2443bwx.. which seems to be ccfl backlit

        You might be able to find it on eBay instead of keep shopping for a new one.

        An alternative idea might be to find a DELL 2407 or 2410. Both are OK in my experience.

        Dell U2415 is not perfekt, but more than ok for daily work.

        KM On several BenQ monitors I have it displays the "no signal" message with a blue background only on the HDMI input.

        Might have also done the same with an old ASUS of mine.

        • KM likes this.

        The Dell U2410 has been my savior for a long time now. I use it at both work and home.

        If work has some sort of used equipment sale in the future, I might buy a hoard of them and stash them somewhere!

          MagnuM yep, i had the U2414- worked pretty well at 75hz. dont drop em. it does seem possible to round up dells en masse as offices upgrade. the salvation army computer store in dallas gets them in..

          KM just got my EW2740L.. it has the blue screen.. what are your settings? AMA off? Lowest blue?
          i think you have an nvidia? can you overclock it?

          • KM replied to this.

            reaganry
            Picture
            Brightness 10
            Contrast 50
            Sharpness 5
            AMA Premium

            Picture Advanced
            Picture Mode Low Blue Light (-70%)
            Overscan Off
            Display Mode Full
            HDMI RGB PC Range RGB(0~255
            Super Resolution Off

            System
            DDC/CI On

            I have an old NVIDIA Quadro NVS 295. It's not meant for gaming, no overclock. Keep in mind Windows 10 later than 1511 has (or may have for some of us) its own cause of eye strain.

              reaganry a bit of an odd thing the blue (and purple) screens on the 'low blue light' benq . fairly annoying actually.. I wonder how yours got rid of it

              • JTL and KM replied to this.

                reaganry You can deactivate the purple "BenQ Logo" screen in the service menu. It comes up when you turn on the monitor by holding down both the third button from the right and the power button until the screen turns on. Then release the buttons and press any of them (excluding power) to open the service menu. It's not dangerous unlike on other monitors.

                  4 days later

                  reaganry hilarious. but been there. such a horrible feeling. trying to adjust and destroy these fragile objects we've come to know as hazardous tools. next time just throw it. be more fun and hopefully not yours. just kidding. hope all worked out okay

                    7 days later

                    Wrightpt1 you should have seen me disabling all the leds on my new novation circuit a few weeks ago

                    KM the monitor has been great... until i had to reinstall windows. now it's headache time again.. wishing i had waited until i could find that LTSB 2015..

                    4 days later

                    Dasung Paperlike Pro is the best! Saved my life!

                    dev