raven83

i saw the Fauser LiFli its about 300 euros but it is not conectable to a pc? The info only comes in the green red bar andby sound right?

It has a mono 3.5 inch audio connector. With a special cable you can connect it to an oscilloscope and use it like a regular sensor. Its sensor is fast and, as depicted in the oscilloscope thread, displays the shape of high frequencies more accurately than the DIY solutions, but can't detect flicker that's about 1% or lower. On the other hand, the DIY sensor is slower but can detect flicker percentages of at least 2 digits after the comma when paired with an 8-bit oscilloscope that has AC mode.

So you bought one and pointed it to the tv,start changing configs until the flicker is low?

Basically, yes. I had bought it to find low-flicker LED bulbs in lighting stores, and now that I already had it, I measured the new TV with it, too. I was surprised when there was a black scene on the TV and the device, which was still active, lying on the table, suddenly started humming. I would have overseen that the TV employed PWM during black scenes otherwise. Something which probably wouldn't happen with OLED TVs though (my TV is a regular backlit one).
The immediate sound feedback really is a helpful feature for fine-tuning settings and brightness.

Do you think this particular device is the best price relation ?

Difficult to say. I think the outstanding feature here is the acoustic feedback, which AFAIK no other device has (only even more expensive ones).

But I also use the DIY sensor (which is like $1 or so). You can assemble it without soldering, if that's your concern. Everything is described in the thread. I would order multiple sensors just in case. They are rather fragile.

I don't know how the Opple compares. If it is accurate and displays the waveform in real-time, then maybe it's enough. The other device mentioned in the forum was the Radex Lupin, but it seems to be very inaccurate, as seen in YouTube videos and customer reviews.

    KM the Opple measures only 24ms and makes these two images. This is my benq ew3270u at 20% brightness for example. It is better than nothing but you are right to say real time is better.


    Since a couple of days i had a small high soft buzz in my head. Searched the web and youtube and i can say with certain that i got some sort of tinnitus. This started on the 3th or 4th day of watching TV with this OLED. I searched the web for oled tv tinnitus and i got severall hits including on this forum. So the TV must GO 🙁

    There are people that got this buzz with their oled tvs and i am convinced that this is another manifestation of flicker.

    My eyes are great no eye strain, but continued to have small low level migraines that evolved to this tinnitus thing. Since i have the return max date at end of jannuary will try to test more but for sure i am to return this TV.

    Also i found that the TV APP on android is better to watch tv (got me more relaxed with viewing less migraines) however when i connect hdmi sources such nvidia shield or even in the internal you tube app things become a bit more syntomatic. ( not sure why this happens all image presets are the same)

    I am also having ideas of buying the 48A90K to see if i get the same result …however this is a pricier tv around 1400-1500 euros :S

    Another hope is a new QD oled Tv that "could" appear in 2023 for 50" fingers crossed!

    What gives me hope regarding oled its that my eyes are fine! So another oled tv model… maybe…. can work for me….

      raven83 I searched the web for oled tv tinnitus and i got severall hits including on this forum. So the TV must GO 🙁

      There are people that got this buzz with their oled tvs and i am convinced that this is another manifestation of flicker.

      Not sure whether tinnitus results from flicker (I won't rule it out though, since flicker messes with your iris muscles), but I do know that one thing that can cause tinnitus are tight muscles around your head, neck, and shoulder area, which might also be the cause for being sensitive to flicker. I got tinnitus roughly two years ago, almost a year after my flicker sensitivity issues came back after being somewhat dormant before that.

      My tinnitus is still there, but I could improve it quite a bit by doing several things, for instance, by wearing prescribed night braces to keep me from grinding my teeth, which eventually can cause you to have tight neck muscles. Also particular sleeping positions can result in tinnitus getting worse (in my case it's laying on the back).

        seeker_of_no_light you think this is not from the tv? Last week i got a cold,fever and gut issues something i eat or seasonal winter viruses according with a medic…but i am recovered. Coincidence or not this started the third tv day and continues…

          raven83 It was not my intention to imply that. Just wanted to propose a theory that tinnitus might be tangently related to issues resulting from flicker, since the eye muscle strain and tightness resulting from flicker may spread to nearby muscles close to the ear and the tightness of these muscles could cause tinnitus.

          Tons of nerves come out of your neck and travel to innervate parts of your face including your ears. The muscles around your neck can entrap these nerves causing all kinds of problems. Forward head posture causes lots of issues. I've had issues that will go away literally as i release a muscle that is all knotted up in my neck. It's pretty crazy. Can get intense tinnitus, tingling, pain, etc

          13 days later

          Update - returned the sony 48A9 master series oled - reason : headaches + migraines

          Visited a diferent shop and saw a samsung 50QN90B …. Got my attention… have the possibility to get an open box for 900 euros.

          Crazy feeling of trying this beast lol however has pwm from 120hz to 960hz according to the image mode chosen. It is a miniled backlight tv…. About 1500 nits max. Lol so its a light cannon ….. At the shop i stared a couple of minutes and was confortable but…. I dont know i got a crazy good feeling about this tv….the motion is absolutely top notch….got me thinking of plasma motion…

          What do you think? Lol

            raven83 my father has an older lg qled tv and i dont get nausea from it. Also thought about testing a light canon and using it only on SDR.

            5 months later

            Regarding my tinitus symptons on the Sony A9s i concluded this were not from the tv but some esomeprazol med i started to take on that time. That was a coincidence and it is not related!

            10 months later

            raven83

            fyi, same PWM TV models can be eye-strain or not. On my xg9505 setting BFI cause eye-strain, also reducing backlight to lowest values results in more intense and not sine-wave PWM and eye-strain also. The problem is you need devices to measure screens and state logic of comfortable ones

              raven83

              yes

              I tested my xg9505 a lot, safe brightness level is 35 + autobrightness ON, ~737hz PWM and sine-wave PWM

              xg9505

              also you can try lg qned90, no PWM at all ( shop test )

              qned90

                simplex I bought one right now…. many thank

                let me see if can work with this product.

                its good to take to the shops and test tvs for flicker etc

                on your tv the best pwm value is the 737hz? Also what is sine-wave? is the up and down of the frequency?

                Thank you

                  raven83 Also what is sine-wave?

                  here is lg qned80 series TV. Look at PWM, very square-view-form, when I measure TVs in shop on the 3 january '24, I found only varyaties of this form. If you compare it to sony ( which is no-eye-strain for me ) you will find they use different types of PWM waveform. Some users reported, they can use samsung s10 (which have sine-wave PWM) and cannot use samsung s20 (or higher, dont remember) - the PWM form is changed to square-view.

                  I measured different monitors and TVs, and can say the PWM form is key. All "old and safe" PWM screens I measured, have sine ( smooth, curved ) view

                    simplex many thanks for your explanation and help! Once the opple master arrive will try that on the A95K qd oled and share my findings! Thank you

                    11 days later

                    simplex

                    My opple lightmaster iv arrived…

                    Started test… sony A95K

                    I put it about 5 cm 10 cm of the tv. With the vertical box below. Testing on white background.

                    The worst result was later when the abl of the tv started….so abl adds flicker….

                    When we test with normal.content moving we get high risk and low risk…..cycling….

                    Am i testing this right?

                      raven83

                      Results without Abl = automatic brightness limiter…. So thi abl are fucking this up! I updated firmware when i bough the tv that was a mistake!

                      raven83 Started test… sony A95K

                      1. On my xg9505, few things have influence on PWM ( increase modulation depth in %)
                        • Light sensor = OFF
                        • Sharpness -> Clearness ( BlackFrameInsertion ) = Min
                        • Local screen dimming = OFF
                        • X-Tended Dynamic Range = OFF
                      2. To get proper results, place Opple4 very close ( to reduce reflections etc ) in dark room ( no more clocks shining, no more lights in room ), then I often start video in YT called "A Screen Of Pure White For 10 Hours" and start to measure
                      3. idk what for A95K, but sony's TV should gave safe PWM at ~730hz, try to find settings

                      My safe settings is I wrote above + light sensor ON + 25 brightness level in dark room.

                      I can post modulation % and avg brightness level which is good for eyes of all viewers

                        dev