Found a problem, all new (true 8bit) monitors have "software" brightness control through screen dimming (pixel flickering/dithering at 15Hz). When the brightness decreases, a "filter" is applied (the backlight brightness is always 100%). On all monitors from Redmi/Xiaomi, this is called DC Dimming. The backlight does not flicker on them/but the pixels flicker. Hardware brightness control does not work. Take for example (8bit) 1) [Redmi G24 VA 165Hz](https://www.displayspecifications.com/en/model/dc4b2e5f) 2) [Redmi G27 IPS 165Hz](https://www.displayspecifications.com/en/model/7b2133fd) 3) [Redmi G27Q IPS 2K 165Hz](https://www.displayspecifications.com/en/model/d58633fe) 4) [Redmi Q27Q IPS 2025 180Hz](https://www.displayspecifications.com/en/model/50f63a7b) ![](https://i.imgur.com/eLi5NHi.jpeg)

@"AlanSmith"#p35989 yup this is why I can't tolerate this fake DC dimming. Oppo also uses this method.

It's just cheating buyers. Manufacturers do not write about the presence of dithering (pixel flickering). Even in the specifications (except for the word DC Dimming) there is nothing. How can a person understand that DC Dimming (an analogue of Flicker Free) can mean the exact opposite? Even "true 8bit" VA monitors flicker. Before us is 8bit = (8bit + FRC) "red eye mode". You no longer need to buy professional monitors (to ruin your eyesight). Now you can do it for just $100. I suspect that IPS phones may have the same problem.

@"AlanSmith"#p35992 right its maddening! They are only taking advantage of us getting us to buy it. So they get rid of backlight flicker for pixel flickering at a LOW frequency.. it's absurd. Pixel flicker absolutely wrecks my head. Pwm is more tolerable.

> @"AlanSmith"#p35989 Found a problem, all new (true 8bit) monitors have "software" brightness control through screen dimming (pixel flickering/dithering at 15Hz). If it really is 15Hz pixel modulations I wonder if a sensitive enough photodiode and oscilloscope could pick it up.

@"AlanSmith"#p35992 Hi, I went through your list of monitors on another thread from Feb 2024, but then saw this more recent post of yours. So are there NO true 8 bit monitors that do NOT have this pixel flickering issue?

This doesn't sound like DC dimming as I know it… We all know that PWM switches the backlight on and off to control brightness. I always thought that DC dimming did something similar in that it lowered the backlight brightness, but did it in a way that didn't flicker using the current to control the brightness directly. Reading up now, I now understand that DC dimming *actually* reduces current to the *pixels* therefore reducing their brightness. The whole point of this DC control is that it doesn't have to flicker to reduce the brightness. The downside is that at low brightness levels on OLEDs you get colour shifts. And I'm left wondering - what they heck then are they doing with the backlight? Is it full power all the time with DC dimmed devices? So why is it stated here that DC Dimming == flickering pixels? Or is this some new or different technique with the same name and what's labelled by @"jordan"#1170 as "fake DC Dimming"? If so, it reads like some frankenstein combination of both worlds. Is this just cheap DC dimming in that they're using PWM techniques on the pixels, rather than the backlight??!

> @"AgentX20"#p42521 Or is this some new or different technique with the same name and what's labelled by [@jordan](https://ledstrain.org/u/jordan) as "fake DC Dimming"? If so, it reads like some frankenstein combination of both worlds. Is this just cheap DC dimming in that they're using PWM techniques on the pixels, rather than the backlight??! That's how this alleged issue reads to me. Really curious if a sensitive enough oscilloscope and diode would pick it up.

I contacted ViewSonic about their true 10 bit VP2786. I copied and pasted the explanation about the pixel flicker from this post. And ask them about it. This was their response. But maybe they might be wrong (coming from support staff) or not even realize their is pixel flicker because it's from some third-party board inside the monitor? They did take several days to investigate and get back to me. So I'm not sure who they spoke with internally. > \*Thank you for your patience. Please see below in regards to "Pixel Flicker". > > The VP2786-4K features hardware-based brightness control, adjusting the backlight without relying on **pixel-level dithering** or low-frequency dimming techniques. Additionally, the panel is a true 10-bit display, further eliminating the need for such methods.\* > > *Sincerely,* > > *ViewSonic^®^ Sales Support*

@"PacificHike"#p42695 I've spoken to ViewSonic about that model and these were the responses. "Thank you for your patience, the VP2786-4K is a DC dimming design." "Hello Jordan, I did some further looking, I found information I can share without the NDA, unfortunately it looks like this model does use a FRC. Color Depth 1.07 Billion colors, 10 Bit with A-FRC"

LEDStrain Forum

Loading...

Something went wrong while trying to load the full version of this site. Try hard-refreshing this page to fix the error.

DC Dimming IPS / Software brightness control

« Previous Page

dev