I bought Opple Light Master, what's next?

Let's check iPhone X (OLED) for flicker | Set the brightness to 50%

Well, who said iPhones are safe for the eyes? Checkmate gentlemen.

Vividblu99 Throughout all of 2023, the Honor 70 Lite was the least problematic handset I've tried, and has provided the most comfort. It's followed closely by the Honor X8A. I've found both of these comfortable when using them at a fixed 60hz refresh rate only.

Good phones from Honor are sold as hot cakes. You are pleased to look at 60Hz, because at 90Hz, modulation (PWM) increases by 1.5 times. At 120Hz, "eye fatigue" is multiplied by two. Let's check out the new "cheap" Honor X8b (which is great to look at). Set the brightness to 50%

The promised 3240Hz were stolen! Again. Huawei, it's not funny anymore! When will you add FullPWM (like Vivo)?

You just need to set the brightness to 25% (so that Huawei magic turns into a pumpkin) | PWM 16%

With a decrease in brightness, you can see "eye protection" at the 184Hz frequency.

It can be seen that the people who work at Huawei are not fools, but they don’t know how to make phones.

dzwdev Of course I can if you send them to me.

Rataplan

Poco X3 NFC - not good, could only use it for a few minutes.
Poco X3 Pro - same as NFC, slightly better colors but that was it.

So what are we waiting for, Let's check Poco X3 NFC (IPS) for flicker | Set the brightness to 50%

PWM is above normal. The eyes will get tired. Other phones have about 5-6%. Set the brightness to 20%

- Who sees the flicker? Me too. It was enough for 20 minutes. My LG G6 also flicker at low brightness. But from his MiniLED screen, my eyes do not hurt.

Lauda89 The last Iphone I had was XR. The phone doesn't flicker at all. Did not include it for a long time. Iphone X is not mine. It's a friend's phone. He only sent me pictures. I don't know about the screen. Given that the phone is seven years old (screen may not be original). Modulation depth 99.5% indicates measurement error (outside the sensor flicker range). PWM 99.5% is only possible on Samsung phones. These "demons" like to make a person suffer.

People say that the Xiaomi POCO F5 doesn't hurt your eyes. Because it has a 1920Hz screen. How can you prove it? Let's check POCO F5 (Amoled) for flicker | Set the brightness to 100%

DC Dimming is on. What already? And I don't feel any flickering. Set the brightness to 75%

Xiaomi deceives the brain with flickering (in multiples of 60). Set the brightness to 50%

Do not pay attention to Modulation depth. The screen is very pleasant. Just flickering is outside the Light Master measurement range. A little fatigue appears an hour later.

nikomanuel96 You don't need a Light Master to see the pulsation. It is enough to have a second phone. Just take a photo of the screen (with an shutter speed of 1/8000). Let's find "eye-safe brightness" on the OnePlus 9R (Amoled) | pictures taken by Ilemar, thank you.

Flickering on the screen are stripes. The more stripes, the more flickering. When the IPS screen looks clean.

As you can see, up to 50% of the brightness "the eyes do not hurt." PWM 20% for 120Hz screen is normal.

When the brightness drops to 30%, red tears will come from the eyes. It's time for DC Dimming to turn on

You can compare two photos. The eye strain has halved. When turning on 60Hz, it is safer four times.

The PWM limit is 30%. At brightness zero "eye protection". Why is DC Dimming disabled by default?

Why do your eyes hurt more at 144Hz than at 60Hz? Using the Motorola Edge 30 Pro (OLED) as an example. Let's look at the graph of the curve.

As you can see, at 144Hz the screen flickers more often. This means that the modulation depth (PWM) at 144Hz is higher. And the eyes will also get twice as tired (at the same brightness).

Every YouTube blogger says that TCL NXTPAPER are safe for the eyes. TCL NXTPAPER even received TUV Rheinland 3.0 certification.. And at the same time, at brightness below 50% TCL NXTPAPER begins to flicker. There are already negative reviews on TCL 40 NXTPAPER 4G and 5G. There is no such information about tablets. Let's check TCL NXTPAPER 12 Pro (IPS) for screen flicker. Set the brightness to 10%

The backlight has been proven to flicker. Light Master sees flickering, but can't find Modulation depth (PWM) right. With viewing angles, the screen has big problems. Already at 45 degrees the screen turns blue. All colors don't seem natural. "Low Blue Light" mode must be turned off. (full pic 1,5mb)

Lauda89 Are you sure that the panel is original?

Here's a photo after replacing the screen for the iPhone 12. The owner bought screen at Aliexpress. After being replaced with IPS (from China), his eyes stopped hurting.

Do not look at the Modulation depth reading (the value is not correct). Most likely, Light Master just shows "eye protection" at a high screen refresh rate. The curve graph of the original IPhone X and 12 screen must be the same. Only an oscilloscope can see in more detail.

You can compare it with the original screen from IPhone 11 (IPS). The difference is just huge (in favor of the original).

Which SteamDeck (old or new) is better for the eye? Let's check Deck LCD. Set the brightness to 50%

The screen is very pleasant for the eyes. After two hours, the eyes do not hurt. Recently released Deck OLED. There is a desire to buy. Let's check the Deck OLED for flicker. Set the brightness to 100%

Valve seems to have forgotten to add DC Dimming mode. After turning on FullPWM mode, it did not get better.

If you're still thinking which SteamDeck do you want to buy? Choose to opt for Deck LCD (my advice).